“”/

Air Restriction Gauges

November 2013

Hastings Premium Filters recommends use of restriction gauges as an integral part of a preventive maintenance program. Air restriction gauges measure the amount of vacuum created when air is pulled through the filter — measuring the buildup of dirt from a new filter's installation throughout its useful life.

Using a restriction gauge maximizes filter service life and prevents excess fuel usage from overly restricted filters, thus saving on operational costs. As a filter traps dirt, it becomes more difficult for the air to pass through the filter, and restriction increases in the air induction system. Air filter restriction may also be affected by high humidity or rainy conditions. As the air filter nears the end of its service life, filter restriction will increase more rapidly.

The restriction gauge should be calibrated per engine or vehicle manufacturer's recommendations. The restriction gauge should be reset whenever the service indicator is checked to determine air filter restriction or when a new air filter is installed. If the air filter is not replaced, the position indicator will return to the same reading when the vehicle is driven under normal driving conditions.

If you're not currently using a restriction gauge, you might consider adding one of the following air filter restriction gauges to your equipment.


Figure 1    KF27 - Direct Mount Air Filter Restriction Gauge

       The KF27 mounts directly on the air intake system and maintains the highest reading until
       the gauge is reset — enabling the gauge to be monitored whether the engine is running
       or not.




Figure 1    KF28 - Remote Mount Air Filter Restriction Gauge

       The KF28 mounts on the instrument panel or firewall and maintains the highest reading
       until the gauge is reset — enabling the gauge to be monitored whether the engine is
       running or not.